These stocks are based on the East German Wieger 940 design and are 1/2" longer than the regular stock. Shell only, does not include hardware or butt plate. Get yours today at this extremely low price!

AK 47 lower hand guard with picatinny rail. Will fit any standard AKM. Get yours today at this extremely low price!

New to RTI!

We now have reproduction oilers for the M1 Carbine! They are marked "II" on the bottom, which is the correct code for Inland produced oilers. Works just like the original. Get one to complete your M1 Carbine today!

ProMag, AK-74 Magazine 30 Rounds, 5.45x39, Polymer, Black

We now have No 4 Mk 1/No 5 Mk 1 Enfield "L Type" Flip Up Sights available! These rear sights are a great replacement for a broken or missing Enfield rear sights. Sights are calibrated to 300 and 600 yards exactly like the original sights. Made of steel.


Please note: these sights are sold "in the white" and do not have a parkerized finish. Can be parkerized for an additional cost.

We now have reproduction Enfield firing pins available for sale! These firing pins work with the No 4 Mk 1 rifles. These firing pins and brand new and have been properly heat treated to ensure maximum durability.

US MADE MIL-Spec Lower Parts Kit for AR-15.
Includes pistol grip, fire controls, springs, pins and detents necessary to complete stripped lower.

New to RTI!

We now have original Garand barrels for sale! These barrels came off of our Ethiopian imported M1 Garand rifles. The barrels are in fair to good condition externally, and may have some pitting in some spots. Bore condition varies from poor to good, most bores have not been thoroughly cleaned and may clean out well. These barrels are sold as-is for a discounted price, all sales final. Barrels for $49.99 are post WWII production, $99.99 barrels are WWII production. Most of these barrels are Springfield Armory manufactured. All barrels have a small import mark on the left side of the barrel behind the gas block (please see photos for details). Perfect for a display rifle or if you're able to clean it out well it may be a great shooting barrel!

Pricing:

$39.99 - Post WWII Production Barrel

$99.99 (+$60) - WWII Production

Brand New M16 Spec AR-15 Bolt Carrier Group. 5.56, 300Blackout, .223 Remington

Carrier - 8620 tool steel
Bolt - 9310 Magnetic Particle Inspected (MPI)
Gas Key - 4140 Machined
Extractor - 4140 Machined
Salt Bath Nitride Finish
Gas keys are staked to the military print on our hydraulic staking machine ensuring consistency in staking. Installed with Permatex around the gas port per the print.
Shot Peened
Fully Mil-Spec Bolt Carrier
100% Made in the USA

New to RTI!

We now have 1928A1 Thompson .45 ACP 10.5" SMG barrels in stock! These barrels are brand new production, chambered in .45 ACP. These barrels are 10.5" inches long overall and fit the 1928 and 1928A1 Thompson submachineguns. Non-finned barrel, we also have finned barrels available. These will also thread into M1A1 Thompsons and function, however an M1A1 front sight does not thread on to this barrel (M1A1 sight pressed & pinned instead). Threaded for a Cutts compensator. Get yours today!

New to RTI!

We now have brand new production AK 47/AKM barrels in stock! These barrels are chambered in 7.62x39 and ready to be installed. The barrels have a gas port drilled and handguard retainer cut as well. 14x1 LH threaded for standard AK muzzle devices. Works with Polish, Russian, Romanian, etc pattern rifles.

Don't miss out on this deal! We only have a small batch available at this low price!

Colt factory M16A1 full auto fire control group. In surplus good to very good condition. Includes original Colt trigger, hammer, disconnector, selector, hammer and trigger pins, sear pin, Colt M16A1 pistol grip, and selector detent and spring. FULL AUTO SEAR IS NOT INCLUDED!

Sear will be removed from kit if local laws do not allow it. Thank you for your understanding.

ALL NFA RULES APPLY.

New to RTI!

We now have brand new production 18" Galil barrels in stock! These barrels are chambered in 5.56x45mm are ready to be installed. 5.56 NATO, 1/7 twist rate. 13x1 RH threaded for standard Galil muzzle devices. Does not have gas port drilled. Works with standard 5.56 Galil receiver. Finished in black oxide.

Don't miss out on this deal! We only have a small batch available at this low price!

New to RTI!

We now have brand new production AK 47/AKM barrels in stock! These barrels are chambered in 7.62x39 and ready to be installed. The barrels have a gas port drilled and handguard retainer cut as well. 14x1 LH threaded for standard AK muzzle devices. These barrels have a parkerized finish and are chrome lined for maximum durability and increased lifespan.

Works with Polish, Russian, Romanian, etc pattern rifles.

Don't miss out on this deal! We only have a small batch available at this low price!

New to RTI!

We now have 1928A1 Thompson .45 ACP 10.5" SMG barrels in stock! These barrels are brand new production, chambered in .45 ACP. These barrels are 10.5" inches long overall and fit the 1928 and 1928A1 Thompson submachineguns. Finned barrel, we also have non-finned barrels available. These will also thread into M1A1 Thompsons and function, however an M1A1 front sight does not thread on to this barrel (M1A1 sight pressed & pinned instead). Threaded for a Cutts compensator. Get yours today!

New to RTI!

We now have 1928A1 Thompson .45 ACP 10.5" SMG barrels in stock! These barrels are brand new production, chambered in .45 ACP, parkerized finish just like the WW2 production ones. These barrels are 10.5" inches long overall and fit the 1928 and 1928A1 Thompson submachineguns. Non-Finned barrel, we also have finned barrels available. These will also thread into M1A1 Thompsons and function, however an M1A1 front sight does not thread on to this barrel (M1A1 sight pressed & pinned instead). Threaded for a Cutts compensator. Get yours today!

New to RTI!

We now have 1928A1 Thompson .45 ACP 10.5" SMG barrels in stock! These barrels are brand new production, chambered in .45 ACP, parkerized finish just like the WW2 production ones. These barrels are 10.5" inches long overall and fit the 1928 and 1928A1 Thompson submachineguns. Finned barrel, we also have non-finned barrels available. These will also thread into M1A1 Thompsons and function, however an M1A1 front sight does not thread on to this barrel (M1A1 sight pressed & pinned instead). Threaded for a Cutts compensator. Get yours today!

New to RTI!

We now have M1 Garand stock sets available! These stock sets are brand new high quality reproductions of the stocks used on the U.S. M1 Garand rifle. These stocks are made of high quality American Walnut wood and can be stained if desired. Each stock set includes the stock, front handguard, and rear handguard with the metal retention clip. With this stock set, you can make your M1 Garand look like it just came out of the factory!

Please note: does not include buttplate or front handguard metal hardware.

We now have 16" 5.56 MLOK Uppers back in stock! These complete uppers were built using Mil-Spec components and each upper was thoroughly inspected before assembly and shipment.

Does not include Bolt Carrier Group and Charging Handle.

Please note: We are currently waiting to receive some parts to complete these upper receivers. Please allow a 3-5 week shipping time frame for this product to ship. Thank you for your patience.

Mil-Spec Forged 7075 T6 Upper Receiver

16" Nitrided Barrel M4 Profile w/ 1/8 Twist Rate

15" Lightweight MLOK Rail System

Low Profile Bas Block